The finely scalloped edges of this San Francisco awning by Beauty Mark gives a classic awning decor to any window it protects. Made from commercial grade aluminum tubing and the most reliable acrylic fibers, these are canopies designed and built to stand the test of time. They help protect any home or business from the sun's damaging heat as well as UV rays, and can even be used as an indoor window treatment for additional indoor beauty. Take a step towards beauty and versatility in your home or business decor with Beauty Mark.
For Windows or Entries.
Residential & Commercial Applications.
Beauty & Function in one product
Blocks up to 70% of heat uptake on west facing windows and doors.
Protects furniture, floors and draperies from fading
Protects skin from harmful UV rays.
5-year limited warranty.
Uses & Ideas
As an indoor window treatment
With signage for a business entry (click for details)
Size & Function
Outset width 4.5" (width is 2.25" beyond casement, each side)
Stationary awning (not retractable)
Assembly & Installation
Comes partially assembled & delivered to your door.
Easy to assemble & install in about 1 hour (requires 1 installer)
Comes with: Wall brackets, stainless steel hardware
Minimum mounting height from ground/deck = 76 in.
Minimum mounting clearance above window/door = 18 in.
Required Tools: High speed drill/adjustable wrench/phillips & hex drivers/level/ladder/tape measure/chalk line/hammer
Due to the wide variety of building surfaces, Awntech does not supply the hardware to install your awning on the wall. You will need to purchase installation hardware at your local hardware store. The manual (download below) will advise you on different surface applications.
Fabric: Beauty-Markฎ Long Life Designer Outdoor Acrylic Fabrics.
Resistant to fading, moisture, mildew & soil.
Fabric Choices: Approximately 35 designer solids & stripes (see color chart)
Frame: Structural aluminum tubing (commercial strength)
Stitching: Beauty-Mark SuperStrength monofilament thread (will not rot or discolor)
Tested to withstand Level 3 hurricane winds (125mph)
Engineered to withstand heavy snow loads
The Awning Support System meets or exceeds all Uniform Building Code requirements