Free shipping
Low Price
View Cart
Order Online Or Call

Gelco Stainless Steel 8" x 8" 2" Flue Stretcher

Item # CPF-13126
List Price:
Sale Price:
& this item ships for FREE!
You Save:
$46.04 (19%)
In Stock.
* Usually Ships Same Business Day.
In Stock.
* Usually Ships Same Business Day.
Item Description
Customer Reviews
Ask & Answer
Downdrafts and pressure can pull the smoke from one flue right down another flue beside it. The Gelco Stainless Steel 8 inch x 8 inch Base 2 Foot Flue Stretcher solves that problem by distancing the smoke from the downward pull of the downstairs flue. Constructed with stainless steel, this flue stretcher extends the flue to increase the draft and raises the smoke and gases above the adjacent downstairs flue. The Gelco flue stretcher comes with a manufacturer's lifetime warranty and easily tightens to the flue tile with screws on four sides of the base.
  • Stainless Steel 2 Foot Flue Stretcher
  • Stainless steel construction with 3/4" mesh
  • Easily tightens to flue tile with screws on all four sides of the base
  • Raises smoke and gases above adjacent downstairs flue
  • Extends flue to increase draft
  • Load tests have demonstrated the system holds tight under several hundred pounds of force
  • Manufacturers lifetime warranty
  • Base: 8" W x 8" L x 34" H - adds 2-ft. to flue height
  • Fits Outside Tile Dimensions: 6-1/2" x 6-1/2" to 8-3/4" x 8-3/4"
Manufacturer: Gelco
Part Number: 13126

Gelco Chimney Top Adhesive
When you are installing, fastening or securing a chimney cap to the chimney masonry you need a high quality dedicated chimney top adhesive. Gelco Chimney Top Adhesive fits the bill and can be used in any standard caulking gun that is made for a 10.5 ounce cartridge. Gelco Chimney Top Adhesive ...
List Price: $17.99
Sale Price: $13.95
Gelco Bolt-On Chimney Cap Legs - Galvanized SteelConsider using this set of Gelco galvanized steel bolt-on chimney cap legs to secure your chimney cap to the top of the chimney flue. Each of the legs comes manufactured with 12-gauge galvanized steel. Consumers need to be aware that under extreme conditions the legs may not prove to be sufficient ...
List Price: $31.99
Sale Price: $25.95
Gelco Stainless Steel Flue Gripper Leg SetYou can secure your Gelco and HomeSaver Pro single-flue chimney caps in place on the top of your chimney using the Gelco Stainless Steel Flue Gripper Leg Set. By installing this set of 4 steel bolt legs extending down from your chimney cap, you can then bolt the cap and have ...
List Price: $40.99
Sale Price: $32.95
Stainless Steel Cap Mounting BracketsYou can attach any brand of single-flu chimney cap to a chimney crown with this set of Copperfield Stainless Steel Cap Mounting Brackets. The set comes with a set of 12 stainless steel 18 gauge chimney cap mounting brackets. The brackets attach using cap mounting screws. The brackets are prepunched for ...
List Price: $44.99
Sale Price: $35.95
Gelco Stainless Steel 8" x 8" 2" Flue Stretcher
5 Stars based on 5 Review(s)
Princeton, NC
5 Stars
I would recommend this item to a friend.

Great Product
April 4, 2012
Very well made product. Good quality and pleasing appearance. I would recommend this product to anyone.

chicago, IL
5 Stars
I would recommend this item to a friend.

Flue Stretcher
March 1, 2012
Great product, well made and easy to install.
Great price, Well made.

Kenneth Pedersen
Chesterfield, MO
5 Stars
I would recommend this item to a friend.

Smoking Fireplace
February 5, 2012
My fireplace never did draw well and discharged smoke frequently found its way into my basement because it was picked up by my second flue which vented by furnace and water heater. A 34" extension for the fireplace flue immediately solved a problem that vexed us for more than 20 years.
Sturdily built, well packaged, easy installation, immediate results.
..wish it were offered in an easily paintable finish so it could blend with the roof.

5 Stars
I would recommend this item to a friend.

Great pipe! at a great price
November 7, 2011
What can i say right out of the box up on the roof done 10 minutes ,thing is well made should last longer than me.
Easy insulation ,tighten bolts done,when thru that eastern wet snow with 40 plus mph wind no problem.

Helen Torres
New York
5 Stars
I would recommend this item to a friend.

Solved My Problem
September 21, 2011
I bought this chimney cap to address a rather unusual situation. I have an outdoor fireplace on the covered patio behind my home. Due to some sort of odd low pressure area caused by the nearness of the house, the fireplace smoked badly. I purchased this cap in hopes of getting the smoke high enough to get into the airstream above my home. It definitely helped my problem and mostly resolved it. To completely solve my issue, I added a special fire grate to really push the heat up the chimney. I had no problems installing the chimney cap. Although they seem secure now, I was afraid that the screws might loosen over time. To prevent the cap from blowing away, I added a thick layer of silicone sealant around the base. The silicone doesn't get too hot when the fire is going and will keep the cap secure even if the screws fall out. The cap is very well built and seems quite durable. It was a good solution for my problem.