Free shipping
Low Price
View Cart
Order Online Or Call

Gelco Stainless Steel 13 in. x 13 in. Base 2 Foot Flue Stretcher

List Price:
Sale Price:
& this item ships for FREE!
You Save:
$74.04 (19%)
In Stock.
* Usually Ships Same Business Day.
In Stock.
* Usually Ships Same Business Day.

Item Description
Ask & Answer
Downdrafts and pressure can pull neighboring smoke and gases from one flue right down another flue beside it. The Gelco Stainless Steel 13 inch x 13 inch Base 2 Foot Flue Stretcher helps to solve that problem by distancing the smoke from the downward pull of the downstairs flue. Constructed with stainless steel, this flue stretcher not only extends extends the flue, it protects your chimney from small pests and debris. The Gelco flue stretcher comes with a manufacturer's lifetime warranty and easily tightens to the flue tile with screws on four sides of the base.
  • Stainless Steel 2 Foot Flue Stretcher
  • Stainless steel construction with 3/4" mesh
  • Easily tightens to flue tile with screws on all four sides of the base
  • Raises smoke and gases above adjacent downstairs flue
  • Extends flue to increase draft
  • Load tests have demonstrated the system holds tight under several hundred pounds of force
  • Manufacturers lifetime warranty
  • Base: 13" W x 13" L x 34" H - adds 2-ft. to flue height
  • Fits Outside Tile Dimensions: 11-1/2" x 11-1/2" to 13-3/4" x 14"
Manufacturer: Gelco
Part Number: 13134
Elite Deals Item Number: CPF-13134

Gelco Chimney Top Adhesive
3 Reviews
When you are installing, fastening or securing a chimney cap to the chimney masonry you need a high quality dedicated chimney top adhesive. Gelco Chimney Top Adhesive fits the bill and can be used in any standard caulking gun that is made for a 10.5 ounce cartridge. Gelco Chimney Top Adhesive ...
List Price: $29.99
Sale Price: $16.95
Gelco Galvanized Steel Bolt-On Chimney Cap LegsConsider using this set of Gelco galvanized steel bolt-on chimney cap legs to secure your chimney cap to the top of the chimney flue. Each of the legs comes manufactured with 12-gauge galvanized steel. Consumers need to be aware that under extreme conditions the legs may not prove to be sufficient ...
List Price: $31.99
Sale Price: $25.95
Gelco Stainless Steel Flue Gripper Leg SetYou can secure your Gelco and HomeSaver Pro single-flue chimney caps in place on the top of your chimney using the Gelco Stainless Steel Flue Gripper Leg Set. By installing this set of 4 steel bolt legs extending down from your chimney cap, you can then bolt the cap and have ...
List Price: $49.99
Sale Price: $33.95
Copperfield Stainless Steel Cap Mounting BracketsYou can attach any brand of single-flu chimney cap to a chimney crown with this set of Copperfield Stainless Steel Cap Mounting Brackets. The set comes with a set of 12 stainless steel 18 gauge chimney cap mounting brackets. The brackets attach using cap mounting screws. The brackets are prepunched for ...
List Price: $49.99
Sale Price: $42.44
There are no questions or answers for this item.

Product Reviews
5 Reviews
100% (5)
0% (0)
0% (0)
0% (0)
0% (0)
100% Recommend this product (5 of 5 responses)
By Helen Torres
New York
March 9, 2013
Solved My Problem
I bought this chimney cap to address a rather unusual situation. I have an outdoor fireplace on the covered patio behind my home. Due to some sort of odd low pressure area caused by the nearness of the house, the fireplace smoked badly. I purchased this cap in hopes of getting the smoke high enough to get into the airstream above my home. It definitely helped my problem and mostly resolved it. To completely solve my issue, I added a special fire grate to really push the heat up the chimney. I had no problems installing the chimney cap. Although they seem secure now, I was afraid that the screws might loosen over time. To prevent the cap from blowing away, I added a thick layer of silicone sealant around the base. The silicone doesn't get too hot when the fire is going and will keep the cap secure even if the screws fall out. The cap is very well built and seems quite durable. It was a good solution for my problem.
By Jimmy
Princeton, NC
April 4, 2012
Great Product
Very well made product. Good quality and pleasing appearance. I would recommend this product to anyone.
By Zach
chicago, IL
March 1, 2012
Flue Stretcher
Great product, well made and easy to install.
ProsGreat price, Well made.
By Kenneth Pedersen
Chesterfield, MO
February 5, 2012
Smoking Fireplace
My fireplace never did draw well and discharged smoke frequently found its way into my basement because it was picked up by my second flue which vented by furnace and water heater. A 34" extension for the fireplace flue immediately solved a problem that vexed us for more than 20 years.
ProsSturdily built, well packaged, easy installation, immediate results.
Cons..wish it were offered in an easily paintable finish so it could blend with the roof.
By Mike
November 7, 2011
Great pipe! at a great price
What can i say right out of the box up on the roof done 10 minutes ,thing is well made should last longer than me.
ProsEasy insulation ,tighten bolts done,when thru that eastern wet snow with 40 plus mph wind no problem.