Free shipping
Low Price
secure-order
View Cart
Order Online Or Call
1.800.618.0601

Hargrove Replacement Fireplace Refractory Panels - 24" X 40" - Set of 2 - 42440

List Price:
$590.95
Sale Price:
$479.95
& this item ships for FREE!
You Save:
$111.00 (19%)
In Stock.
* Usually Ships Same Business Day.
In Stock.
* Usually Ships Same Business Day.
Item Description
Customer Reviews
Ask & Answer
This set of 2 fireplace refractory panels is perfect for replacing your existing panels. These panels are designed to withstand extreme heat and can be used in prefabricated and zero clearance fireplaces. Each panel is 1 inch thick and can be cut to fit the exact size of your fireplace. You can use these panels to replace the left, right, or back panel. One edge of each of these replacement panels is tapered to give a finished look if used as a left or right panel.
* Please Note: Curing instructions are available for download in the manual below.
* Also Note: This item is not returnable unless it is defective or damaged in transit.
Features
  • 24 Inch (height) X 40 Inch (width)
  • Set of 2
  • Engineered for extreme heat
  • For use in prefabricated and zero clearance fireplaces
  • Panels are 3/4 inch thick
  • Can be cut to fit sizing requirements
  • Can be used as a left, right, or back panel
  • Tapered on one edge for a finished look when used as a left or right panel
Manufacturer: Hargrove
Part Number: 42440
Elite Deals Item Number: CPF-42440KIT

Hargrove Replacement Fireplace Refractory Panels - 24" X 40" - Set of 2 - 42440
$479.95
5 Stars based on 13 Review(s)
Anne
San Antonio, TX
5 Stars
I would recommend this item to a friend.

Solved My Problem!
October 16, 2013
Our chimneysweep said our fireplace wasn't safe to use, as the back and bottom panels were cracked beyond repair. He quoted me $700 for the repair and told me he couldn't actually do the repair for TWO months.... so after searching online I found these replacement panels. They arrived in just over a week, delivery was perfect! No damage what so ever. I spent $15 on a diamond blade for my circular saw and I was in business. The blade made clean cuts. It was loud & dusty & sparks flew, but installation went without a hitch and the fireplace looks brand new. I highly recommend these panels.

Kathy
mountains of N.C.
5 Stars
I would recommend this item to a friend.

Just What We Needed!
March 7, 2014
We have a Marco fireplace, which is no longer in business, so finding firebrick panels we thought would be impossible. These worked perfectly! You get two panels, which we needed two, so one we used on the back (and have enough left to do a side if ever needed) and it pretty much took a full panel to do the bottom. They are fragile but we bought a blade for our SKIL saw to cut them. Had no problem or breakage. May seem a little $$$ but worth it. We use our fireplace daily during the Winter months. The panels aren't as thick as the Marco panels and they don't have the wire mesh embedded. We'll see how they hold up.
Pros:
Prompt delivery. Packaging prevented any breakage. Easy to cut (with the right blade). Did the complete removal and install in 2 hours max. This store is very good with sending emails regarding information to let you know everything about their shipping, being prepared for delivery and how the panels are to be treated. That info is valuable.
Cons:
They're expensive and you can't buy just one.

Troy
Illinois
5 Stars
I would recommend this item to a friend.

Good Company
December 22, 2013
Got my items and had no problems.

Jeff
Basking Ridge, New Jersey
5 Stars
I would recommend this item to a friend.

Great Customer Service
March 11, 2013
First set I received was cracked, but had no hassle refusing. Company reshipped replacement set very quickly. VERY SATISFIED!!!!
Pros:
High quality product.

Joel
Canyon Lake CA
5 Stars
I would recommend this item to a friend.

Replacement Fireplace liner
November 13, 2012
As advertised. Showed up quick, cut to size, works great! Thanks

Rod
San Francisco
5 Stars
I would recommend this item to a friend.

Good Product
May 15, 2012
Used to custom build a firebox, easy to cut with a diamond blade.

Shedman
Redwood City, CA
5 Stars
I would recommend this item to a friend.

Review
March 19, 2012
Good

CT Dad
Central Connecticut
5 Stars
I would recommend this item to a friend.

DIY refractory panels
February 21, 2012
Panels were exactly as described. Shipping and delivery was quick. The freight company arrived when they said they would and the panels were very securely attached to a pallet. No damage at all during shipment. The panels were very easy to install...Just lay the old panel on top, trace the shape and cut with a circular saw with a masonry blade. I removed the old panels and had the new ones installed within about an hour. Just be sure to do your cutting outside away from the house. Like all masonry projects, there is a good deal of dust when you cut. I recommend the panels and this store to anyone looking to save some money and get a quality product.
Pros:
Quality of product, fast delivery, great customer service
Cons:
Would like more sizes, I had to buy 2 panels and had a good deal left over.

Oleg
Atlanta, GA
5 Stars
I would recommend this item to a friend.

Great customer service
February 11, 2012
Purchased both panels, first of all - the best pricing, second - super fast shipping, great communication, customer service willing to go an extra step to make sure, you get a best service. Thank you. Very happy with the product.
Pros:
Qualitty, fast shippng, great service.
Cons:
Nothing.

John
Rolla, MO
5 Stars
I would recommend this item to a friend.

Hargrove Replacement Fireplace Refractory Panels
February 7, 2012
The rear refractory panel in my zero-clearance fireplace sustained normal wear and tear damage due to years of fireplace use. After scouring the internet for a replacement panel for this particular fireplace, I discovered that the fireplace manufacturer of my fireplace had gone out a business. This is not uncommon for older fireplaces. I checked around in my town and couldn't find any fireplace store who had replacement panels. I asked the chimney sweep who cleans my chimney and he told me that needed to get replacement panels and that he would cut and install them for me. My fireplace has a back, two side, and a floor panel. Four total panels. I only had damage to the back panel. After surfing the internet I stumbled across what I thought was the best deal for these replacement panels at e-Fireplace Store.com. I sent them a few emails and made a call or two and decided that the best deal for me was to order their 24X40 set of 2 panels. I planned to have my chimney sweep guy cut what I needed for this job and save the leftovers for any future replacement. There's free shipping on the set of 2 panels, which is a "significant" savings on the cost. I ordered the panels and it took about 2-3 weeks to receive them. That seemed a bit long, but I suppose they make the panels once they're ordered. The panels arrived in an 18 wheeler truck, so plan to have an 18 wheeler in your driveway, or if that won't work as it didn't for me (I live very rural and up a long narrow driveway), be prepared to have the driver meet you somewhere, and bring your pickup truck. The panels were expertly packed on a pallet. As packed, they're pretty heavy. Be careful once they arrive because these panels are fragile. They will break. Take the damaged panels out of your fireplace and use them as your cutting template. The old panels are probably held in with clips. Mine were. It took my fireplace guy about 15 minutes to do the entire operation. He used a "diamond blade" on his saw to cut the panels. It worked good. Do NOT use a standard saw blade. Once installed, don't light a full fire to your fireplace. New panels must first cure and expand to the heat gently before they're completely ready for a fire. This takes about three hours. I used one of those match-lit logs you can buy at any Walmart. They don't produce extensive heat, they burn for about three hours, and they're easy to monitor. Once that part's complete, fire away. I'd also be careful not to over burn the first time. In other words, keep your wood OFF the panels and don't light a bonfire to your fireplace. All in all I'm very happy about these panels. The eFireplaceStore.com folks will replace them if they arrive damaged, and mine refract the heat as designed and has been durable up to now. We've been using the fireplace daily for about a month since we had the back panel installed, with no deficiencies noted. I suppose the only downside to buying refractory replacements is the cost. They're not inexpensive, but they're worth the expense if you rely on your fireplace to provide heat during the winter months. I rate eFireplaceStore.com and these panels with an "A" and would not hesitate to recommend this product to a friend. Good luck!
Pros:
Ease of cutting, the customer service I received from eFireplaceStore.com, free shipping
Cons:
Cost. Seems high when you compare it to buying a $250 TV. Go figure, but they're expensive everywhere.

larry cobb
katy, TX
5 Stars
I would recommend this item to a friend.

replacement panel
December 9, 2011
relatively easy installation with basic tools. much cheaper than local chimney repair supply houses. no complaints
Pros:
cost ease of cutting

Rick
Denton , Tx
5 Stars
I would recommend this item to a friend.

Great value, great service
November 25, 2011
I had 2 bad panels so I opted for the set of 2 24 x 40 panels. To my surprise they were shipped by truck and not FedEx or UPS. The way they were wrapped and palleted made it so that nothing could be stacked on top of them so damage is almost impossible. The trucking service called my cell phone to let me know they were coming. "A WEEK EARLIER THAN ESTIMATED" which was fantastic. And to top it all off. I got 3 panels cut out of the 2 pieces,both sides and a back . And still have enough left over to make 1 more if anything happens.I priced in stores and they are really expensive so if you don't mind cutting them you save a lot.
Pros:
Easy to cut "if you don't mind spending $24.00 on a diamond blade. $300.00 cheaper than buying precut. Trucked instead of using OOPS or FEDERAL DISTRESS. Plenty of product to do the job right.
Cons:
NOTHING

Mike Litz
Largo Florida
5 Stars
I would recommend this item to a friend.

Replacement Panels
October 22, 2011
I bought two panels to replace my old fire place with. The panels where easy to cut down to the proper size with a concrete metal saw blade. make sure you wear a dust mask. ran it 3 times now and no cracks
Pros:
easy to cut down to sizes
Cons:
shipping to longer then I hoped



By Jason from Springfield, VA on June 25, 2013
Can I use these panels on the bottom panel of my fireplace insert?
By Dawn on June 25, 2013

Answer:
Yes, they can be used on the floor of a wood burning insert.

By Jim from Bronx, NY on September 10, 2013
What is the weight for each item?
By Tyler on September 11, 2013

Answer:
Each of these panels weigh 75 lbs.