For the purposes of compatibility, this tee section is specifically designed for use with DuraFlex vent pipes and components with a 5 inch inner diameter. The tee comes with an attached tee cover but, more importantly, the 8 inch long 'snout' section of the tee that projects from the 10 inch long tee body is completely removable. This setup allows you to use the DuraFlex SS Tee with a Removable Take-Off as a tee when you need it, and to remove the snout when you don't. That not only widens the range of uses, but it also saves you money by essentially getting two venting products in one purchase.
November 10, 2010
Fits the liner perfectly and makes the 90 degree turn a snap. Just take it apart and slip the vertical down the chimney into the adjustable band on the horizontal sleeve, and tighten it up. Does need about 5 1/4 inches for clearance.