These logs have the realistic look of split wood that has aged in the wood shed for a few years. The set comes with the G10 Vent Free burner system featuring the I-200 Plus burner, ODS safety system, pre-assembled valve, lava-fyre granules, glowing embers, custom, and connector kit. You can order the basic log set or add different options for remote control of the fire. This log set burns natural gas as it produces 37,000 BTU. The minimum fireplace dimensions for the basic set are front width 28", rear width 20", depth 13", height 18". Remote pilot options require greater widths. Professional installation is strongly recommended. Local codes and ordinances should be check for permitted uses before you purchase & install this set. Use a carbon monoxide detector with ventless gas logs.
Features
|
Minimum Fireplace Dimensions
Required for this Set: |
- Front Width: 28"
- Rear Width: 20"
- Depth: 13"
- Height: 18"
|
| *** It is recommended to
include complete fireplace dimensions (Front Width, Rear Width, Depth,
& Height) in the comments section when placing your order to ensure
proper sizing. |
|
Safety Pilot Kit Options: |
| A safety pilot is an automatic
shut-off valve, which shuts off the gas flow if the pilot extinguishes or
the gas flow is interrupted in any way. You can choose between
manual & automatic (remote ready) safety pilot systems. |
| A Manual Safety Pilot Kit is included will
all G10 Series Burner Systems. |
| If the On/Off Remote Ready Pilot Kit
is chosen, you will receive the Peterson 12M Safety Valve System. |
| If the Variable Flame Remote Ready Pilot Kit is
chosen, you will receive the Peterson 15M Safety Valve System. |
| Please Note: Remote
Ready Pilot Kits do NOT include a remote control.
Remote Controls must be purchased separately. |