Peterson Real Fyre Split Oak Designer Plus Vented Gas Log Set Natural Gas - 30"
The Split Oak Designer Plus gas logs are hand painted and look just like real split oak. It is hard to tell the difference between these logs and those out in your neighbors woodshed.
Sets include handcrafted logs, custom grate, Real-Fyre Burner System, Granules (sand or vermiculite), ember glow, grate clips/log locators, pan/connector kit and damper clamp.
*** Must be installed in a fully vented wood burning fireplace and must be burned with the damper open. Professional installation is recommended.
|
Minimum Fireplace Dimensions
Required for this Set: |
| Log Set Only |
-
Front
Width: 34"
-
Rear
Width: 30"
-
Depth:
14"
-
Height:
16"
|
| Log Set + Safety
Pilot Kit |
- Front Width: 38"
- Rear Width: 34"
- Depth: 14"
- Height: 16"
|
| Log Set + Remote Ready Pilot Kits |
- Front Width: 42"
- Rear Width: 38"
- Depth: 14"
- Height: 16"
|
| *** It is recommended to
include complete fireplace dimensions (Front Width, Rear Width, Depth,
& Height) in the comments section when placing your order to ensure
proper sizing. |
|
Safety Pilot Kit Options: |
| A safety pilot is an automatic
shut-off valve, which shuts off the gas flow if the pilot extinguishes or
the gas flow is interrupted in any way. You can choose between
manual & automatic (remote ready) safety pilot systems. Pilot
kits are optional for Natural Gas units and must be purchased separately. |
| If the Safety Pilot Kit option is chosen,
you will receive the Peterson
SPK-26 with your order. |
| If the On/Off Remote Ready Pilot Kit
is chosen, you will receive the Peterson
APK-16M with your order. |
| If the Variable Remote Ready Pilot Kit is
chosen, you will receive the Peterson
APK-150M with your order. |
| Please Note: Remote
Ready Pilot Kits do NOT include a remote control.
Remote Controls must be purchased separately. |
|  | 
 | |
