Shelter Logic 6 × 10 Instant Storage Shed CanopyThis Shelter Logic 6 × 10 Instant Storage Shed Canopy is exactly what it says: instant storage. Maybe you bought an extra piece of equipment and don't have any place to put it. Maybe you'd like to quit cluttering up your garage with all your stuff and consolidate it in one protective area. Or maybe you just need storage now and don't have the time or money to build a conventional storage shed. The Shelter Logic 6 × 10 Instant Storage Shed Canopy has you and your stuff covered.Covered with a beam welded 1 3/8 inch steel frame prepared with a 13-step Rhino Shield process and bonded with DuPont thermoset baked on powder coat finish that won't rust, weather, chip or peel. Covered with a heat bonded, triple layer, polyethylene canopy cover that is UV treated inside and out against fading, aging, or harmful fungi. Covered with cross rails that keep the frame true and Twist-tite technology that tensions the cover against the shed frame for a wrinkle-free, weather-stopping look. The canopy cover is tear-resistant, the wide-based foot pads on each leg, the auger anchors, and the ratchet tie-downs lock the shed in place, and the high profile white interior provides enhanced visibility. The only thing the Shelter Logic 6 × 10 Instant Storage Shed Canopy can't do is read you the simple, step-by-step assembly instructions. If you can handle that part, this shed is a can't miss product. For every question that begins with 'But where am I going to put my...?', the anwer should be the Shelter Logic 6 × 10 Instant Storage Shed Canopy every time.
- Sturdy beam welded 1-3/8" diameter steel frame is field tested to withstand severe environmental
conditions
- High grade steel frame goes through a 13 step Rhino Shield surface
preparation process
- Bonded with DuPont™ thermoset baked on powder-coated finish to eliminate
any rust, weathering, chipping and peeling
- Slip fit connectors and swedged tubing allow easy assembly
- Wide based foot pads on every leg ensure a dependable sturdy base and easy
access to secure anchor points
- Patented Twist-Tite™ technology tensioning system secures taut to pipes
ensuring longer life and a wrinkle free look
- Easy-Slide Cross Rail™ system clamps tight to square up, smooth out, and
lock down shelters
- Fitted one piece full valance cover
- Heat bonded, triple layer, polyethylene cover with enhanced weave to
ensure its 100% waterproof
- UV treated inside and out with added fade blockers, anti-aging,
anti-fungal agents
- High profile white interior lining creates enhanced illumination
- Totally tear resistant reinforced rip-stop cover
- 1 year warranty
- 112 lb.
Includes:
- 6' W x 10' L x 6'6" H steel frame
- Full valance fitted cover
- (2) Double zippered door panels
- (4) Ratchet tie-downs
- (4) 15" Auger anchors
- Steel foot plates
- Easy step by step instructions
|  | 
 | |
